Jewelry should never be worn in situations that could accentuate the oxidation process. We recommend that you remove jewelry before going to bed or exercising. Jewelry must not be exposed to chlorine, chemicals or salt water. Avoid contact with creams, soaps, hairspray, make-up and perfumes, as these can speed up the oxidation process and wear of plating. We also recommend that you always separate pieces of jewelry when storing them to reduce friction that could damage the polish and color.

Sterling Silver is an ever-changing precious metal with extraordinary shine. Because it is an ever-changing material, it is naturally subject to oxidation when it comes into contact with the air. Use an ordinary microfiber cloth (with no chemical and/or natural cleaners) to shine Sterling Silver jewelry and prevent oxidation build-up. However, remember that a cloth cannot remove scratches or abrasions caused by contact between the jewelry and hard surfaces.

For cleaning, use water, but no soap, and a soft brush. Gently brush the jewelry in a circular motion, then rinse with clean water. Use a toothbrush to clean jewelry with stones that would otherwise be difficult to clean. Caution: Toothpaste (abrasive), soda (acid) or silver products should not be used for cleaning because they can damage the jewelry and its surfac


We recommend that you remove your jewelry before going to bed or exercising. The jewelry should not be exposed to chlorine, chemicals, salt water. They must not be in contact with creams, soaps, hair sprays, make-up and perfumes, because these can change the appearance.

The jewelry should not be exposed to chlorine, chemicals, salt water. They must not be in contact with creams, soaps, hair sprays, make-up and perfumes, because these can alter their appearance and lose their brilliance. The natural phenomenon of opacification, due to oxidation, is common to all precious alloy products and can be eliminated by professional cleaning if the oxidation stage is advanced. Professional intervention is also required for the restoration of surface finishes such as rhodium plating or burnishing. The stones mounted on a jewel have their own intrinsic delicacy, so even involuntary shocks could damage or break them, as well as thermal shocks.

For gold jewels with precious stones set, it is recommended to prepare a mixture with a spoonful of baking soda and a spoonful of liquid soap, preferably from Marseille. Rub the mixture on the jewel with the help of a finger and rinsing with warm water.

Usually the jewels are placed in a drawer or in a jewelry box so that they do not get dirty more than necessary. We recommend wrapping each jewel in a soft cloth, in this way they will be protected from dust and will remain separate from each other to avoid scratches and bumps.


Amen’s genuine leather is a natural product that can expand and loosen with time. Furthermore, small variations in the color and thickness of the leather may appear. Do not submerge in water or other liquids that may cause damage or discoloration.


Amen jewelry is made in Italy in compliance with Leg. Decree  no. 206/2005, and in China. It is imported into Europe (EU) by Croce del Sud s.r.l., with registered office at via Enrico Mattei 51, Arezzo, Italy, VAT no.  IT-02153030511. Amen jewelry is made using fine materials like Sterling Silver, 9k, 14k and 18k Gold, 316 Steel and Bronze. It contains no cadmium or lead. It may have nickel release rates in compliance with EC Regulation 1907/2012 and standard EN 1811:2011.


Click here to find all the information about  Warranty.

© 2019 Croce del Sud Srl - All Rights Reserved. Share Capital. 51.000,00 TIN and VAT N. 02153030511 REA: AR-165669 | Cookie Policy | Privacy Policy | DESIGN AND CONSTRUCTION OF THE ECOMMERCE SYSTEM: WEBDEV